What is Nu-Life Pitch & Resin Remover

Nu-Life Pitch & Resin Remomer is a liquid cleaner that removes wood
& pitch resin from clogged abrasive sanding belts used on wide belt
sanders.  It works on
paper or cloth backed belts and works instantly.  
It is a water based alkaline cleaner that is non-flammable &
biodegradable.

Directions for Use:  Cloth backed belts

Mix approximately 5 - 10 gallons of the cleaner into a drum.  Dunk the
loaded sanding belt into the drum.  The wood residue will come right
off.  Then dunk the sanding belt in a second drum with clean water.  
Once dry, its ready for reuse.
 
                                             
-OR-
Spray the cleaner onto the belt and rinse off with water, or blow the
residue off with an air hose.

Directions for Use:  Paper backed belts

Spray on Nu-Life Pitch & Resin Remover with a pump sprayer, or from
the 32 oz bottle. Then blow off the wood residue with an air hose or
spray on water to rinse the belt off.  
        

Can I clean the sanding belt while it is still on the machine?

Yes, it is important to clean the burn before the belt is damaged.  First,
stop the machine and loosen the tension on the belt.  While the belt is
loose rotate it while spraying on the cleaner.  After the mark is sprayed,
use an air hose to blow the resin off.  The cleaner will have emulsified
the burned on pitch and resin.

What else can it clean?

Nu-Life Pitch & Resin Remover will also clean saw blades, drill bits and
any other cutting tool which get resin build up.  Spray the cleaner on and
wash off with water.

The past three years I've saved          
thousands of dollars on sanding         
belts.  I've set up an area in my         
shop and every few weeks dunk          
the loaded belts into a barrel of         
the cleaner.  After dunking                
them, I rinse them with water             
and set them to dry.  The belts          
are reused about three or four            
times depending on the                     
material I'm sanding.

Dan Ferrara,
Ferrara Design.
_______________________________________________________________________________________________________
NU-LIFE LIQUID 1Gallon Bottle
1 Gallon Bottle. Instantly removes wood & pitch resin from abrasive belts used on wide belt sanding machines. This product is Biodegradable.
$45.00
Ship Weight:
9
NU-LIFE LIQUID 5 Gallon Bucket
5 Gallon Bucket. Instantly removes wood & pitch resin from abrasive belts used on wide belt sanding machines. Biodegradable. This is the best vaulue.
$160.00
Ship Weight:
45
ABRASIVE SERVICE COMPANY
15 North Washington Street Plainville, Ct 06062
Phone: 1-800-569-1274  Fax: 860-747-3989

This is a sanding belt from a wide
belt sander.  We dunked the belt
into a barrel   containing
Nu-Life
Pitch & Resin Remover.
The top
half of the belt was loaded with
Pine, the bottom half is
completely clean. The pine resin
was removed within seconds.
Before Cleaning
After Cleaning
_______________________________________________________________________________________________________
HOME PAGE        NU-LIFE BARS        NU-LIFE PITCH & RESIN CLEANER        PITCH & RESIN MSDS        

        
ORDERING INFO         CONTACT US          RETURNS             PRIVACY POLICY        
ABRASIVE SERVICE COMPANY
15 North Washington Street Plainville, Ct 06062
Phone: 1-800-569-1274   Fax: 860-747-3989
_______________________________________________________________________________________________________